![[ Search ]](ImgMN/Search.gif) ![[ Products ]](ImgMN/Browse.gif) ![[ Browse by Connector ]](ImgMN/Browse-by-connector.gif) |
Part
Number: ADP4111-20
Product Description: Projector
Connector Video Extender with Audio 20 Meters
Category: Amps,
Splitters, and Monitor Accessories
|  |
|
Introducing the Projector Connector
The Point-To-Point Projector Connector allows
you to simultaneously send a VGA Signal (up to 1280x1024) and an Audio Signal
to a projector over STP (Shielded Twisted Pair) CAT5e or CAT6e cable. The
system is precisely tuned to send a picture perfect image to the
projector.
Transmitter
Specifications:- Inputs - VGA x 1 (PC and Laptop), Stereo Audio 3.5mm x
1
- Outputs - VGA x 1 (Local Computer Monitor), Stereo Audio 3.5mm x
1
- Power - 12V DC Adapter is included with Transmitter
- Connectivity - 1
Shielded RJ45 port (Shielded Twisted Pair cable required)
Receiver
Specifications:- Outputs - VGA x 1, Stereo Audio 3.5mm x 1
- Power - 12V
DC Adapter is included with Receiver
- Connectivity - 1 Shielded RJ45 port
(Shielded Twisted Pair cable required)
- Models - 3 different models made to
work with the following cable lengths:
- ADP4111-20 kit with
receiver made for 20 Meters
- ADP4111-30 kit
with receiver made for 30 Meters
- ADP4111-40
kit with receiver made for 40 Meters
With the PTP Projector Connector
Type B you are getting everything you need to make the multimedia connection
between your computer and the projector.
Please Note:These receiver
units have been tuned to specific lengths. This one is set to 20 meters (65.6
feet), which means that the sum of the lengths of cables going from transmitter
to receiver needs to be 20 meters or within one meter of 20 meters. Cables are
sold separately, see below for cabling selections: |
| Categories and Products Related
to: Projector Connector Video Extender with Audio 20
Meters | |
|
| E-mail
product page to a friend |
All contents
Copyright © 1996-2013. All Rights
Reserved. |
